Geometric Shape Imperfections

This article looks at those imperfections related to poor geometric shape and will concentrate on the following: Excess weld metal   ...

Read more »

Root Concavity - Suck Back

A shallow groove that may occur in the root of a butt weld. Common causes Root concavity is caused by shrinkage of the weld pool in t...

Read more »

Excessive Penetration

Excess weld metal protruding through the root of a fusion (butt) weld made from one side only. With pipe welding this type of imperfection ...

Read more »

Incompletely Filled Groove - Underfill

This is a continuous, or intermittent, channel in the surface of a weld, running along its length, due to insufficient weld metal. Comm...

Read more »

Linear Misalignment (High-Low)

Linear Misalignment also known in the USA as high-low. This imperfection relates to deviations from the correct position/alignment of the j...

Read more »

Overlap (Cold Lap)

This is an imperfection at a toe or root of a weld caused by metal flowing on to the surface of the parent metal without fusing to it. It m...

Read more »

Geometric Shape Imperfections - Undercut

This is an irregular groove at the toe of a run in the parent metal. The figure shows undercut at surface of a completed joint but it may a...

Read more »

Geometric Shape Imperfections - Excess weld metal

Excess weld metal (also called cap height, overfill or reinforcement) Fig.1. Excess weld metal This is weld metal lying outside the p...

Read more »